PL EN DE
European Funds for a Modern Economy Republic of Poland Co-funded by the European Union

We are delivering a project co-financed by the European Union. See the details

Quality you can check for yourself

We manufacture in Poland, from pure copper and with materials from proven suppliers. Below, in concrete terms: how our cables differ from cheap substitutes — and how anyone can check it themselves.

Why HYBSZ

Six facts about our cables

Not “high quality” and “the best materials”, but things you can measure, weigh or bend in the frost.

100% Cu

Pure copper, never CCA

Every cable we manufacture has copper conductors. We do not use copper-clad aluminium or any other substitute.

Class 6

The most flexible conductor

Our jump leads have class 6 conductors to IEC 60228 — made of a great many fine strands. They coil easily and do not break at the clamps.

−40 °C

No stiffening in winter

The sheath of our jump leads stays flexible down to −40 °C. It works when it is needed most: on a freezing morning.

UV

No fading in the sun

The sheath is UV-resistant — it does not change colour or turn brittle after a summer in a boot or on a trailer.

PL

Made in Ostrów Wielkopolski

We do not repackage other people's products. We buy materials from proven suppliers, with material data sheets — we know what every metre is made of.

24 mo.

Warranty on jump leads

We give a 24-month warranty on our jump leads. A manufacturer who knows its product can stand behind it — as we have since 1996.

Comparison

HYBSZ versus a typical cheap cable

Cheap jump leads and installation cables look much the same. The difference is under the insulation — and it shows in the frost or at the first difficult start.

HYBSZ cable Typical cheap substitute
Conductor material 100% copper often CCA — aluminium with a thin copper coating
Conductor build (jump leads) class 6 to IEC 60228, the most flexible often stiffer, with thicker strands
Sheath in the frost flexible down to −40 °C may stiffen and crack
Sheath in the sun UV-resistant, does not fade may fade and turn brittle
Origin of materials proven suppliers, material data sheets often unknown — the importer only knows the label
Warranty (jump leads) 24-month manufacturer's warranty often no manufacturer's warranty
Manufacturer SH HYBSZ, Ostrów Wielkopolski, since 1996 often anonymous

Pure copper

What CCA is and why we do not use it

CCA (copper clad aluminium) is an aluminium conductor with a thin copper coating. From the outside it looks like copper and it is much cheaper — which is why it ends up in cheap jump leads and installation cables.

Aluminium conducts electricity about 40% worse than copper. At the same cross-section a CCA cable has higher resistance: it heats up more and less current reaches the starter. In practice that means a weaker start — especially with a diesel, especially in winter.

Aluminium also copes worse with repeated bending, breaks more easily at the clamps, and its connections oxidise over time and lose contact. That is why every cable we manufacture uses copper only.

Check it yourself

How to recognise a good cable

No laboratory needed. Four simple checks you can do in a workshop or a garage.

01

Scrape a strand

Scrape a single strand of the conductor with a knife. Copper is copper all the way through. In CCA a silvery core appears under the thin coating.

02

Weigh the cable

Copper is more than three times heavier than aluminium. A cable of the same cross-section and length that is clearly lighter is a warning sign.

03

Bend it in the frost

Leave the cable out in the frost or in a freezer overnight and try to coil it. A good sheath stays flexible, a poor one stiffens and cracks.

04

Look at the conductor, not the insulation

What counts is the actual copper cross-section. Thick insulation can hide a thin conductor — compare the conductor itself, not the diameter of the whole cable.

Questions

Frequently asked questions

Are HYBSZ cables made of pure copper?

Yes. Every cable we manufacture has copper conductors. We do not use copper-clad aluminium (CCA) or any other substitute.

What does a class 6 conductor mean?

The class under IEC 60228 describes how the conductor is built, not the grade of copper. Class 6 is a conductor made of a great many fine strands — the most flexible in the standard. We use it in our jump leads.

Do the jump leads stiffen in winter?

No. The sheath of our jump leads stays flexible down to −40 °C.

Does the sheath fade in the sun?

No. The sheath is UV-resistant — it does not change colour or turn brittle in sunlight.

What warranty do the jump leads have?

A 24-month manufacturer's warranty.

Where do the materials come from?

From proven suppliers. We hold material data sheets for the materials we manufacture from.

Where are HYBSZ cables made?

In our plant in Ostrów Wielkopolski, Poland. The company has been in business since 1996.

Jump leads

See the BAT catalogue — from 400 to 1200 A.

BAT catalogue Ask for a material data sheet